The Perfomaster provides the hardware and software to generate controlled spark detection and, evaluate the spark to produce a pulse signal. The pulse signal is available on the output connector and can be used for detecting and counting the perforations.
Additionally, the Perfomaster can be used for detecting holes in plastic film and caps.
The Perfomaster contains an electrode as well as a high voltage source. It is powered by 24V DC, so no high voltage supply is required. Electrodes are fitted as standard with three special alloy emitter pins which are removable for replacement.
This is available in two versions, 10V or 24V control. Both versions are powered by a 24V DC supply.
A status signal LED provides direct system information on the Perfomaster.
Supply voltage and output voltage setting to the Perfomaster can be provided in two ways: 1) Directly from the machine’s PLC 2) With an additional external control kit
This product has a 4-year warranty
Replacement for discontinued SDVP & EL-10 electrode
Housing: ABS/PTFE
Cable: Low voltage cable, standard M12 connector
Input power: 24 V DC, <0,5 A
Emitter pins: Special alloy
Max detection frequency: 25 Hz
Signal: Multicolour LED
Signal output: Optocoupler
Control voltage: 0-10 V of 0-24 V
Ambient temperature: 0 – 55°C
Use circumstances: Industrial
Protection classification: IP 54
Warranty: 48 months
PM-2010 – 10V control version.
PM-2024 – 24V control version.
Website managed by Iron Valley Digital
