The CMM IQ Easy is a charging generator specially designed for IML applications. With a small profile footprint, this unit has fully integrated high voltage parts and needs only a 24V DC supply. The robust housing is compact and only weighs 500 grams, making it perfect for the end of arm mounting in your IML pick and place handling systems. It easily withstands the high G-forces occurring during IML processes.
The CMM IQ Easy has a unique (patented) Cycle OK feature. This innovative feature completely eliminates the guesswork and experimental setup for each individual IML application and when changing product or label.
Using the parameters, generated by the CMM IQ Easy, you can significantly reduce the charging and the total cycle time of your injection moulding process. It will save you time and money! The CMM IQ Easy increases reliability, reduces initial set up, change over and cycle time.
When the label(s) have accumulated enough electrostatic charge, a signal will become active, indicating that the charging is finished. This signal can be used by the machine interface to decide when to stop charging. A second stage, in the Cycle OK, is a signal that indicates that the charge on the mandrel has dropped to a safe level allowing removal of the mandrel from the mould.
The Cycle OK signal gives you, even more, information about the process. If during the charging process, the charging level deviates more than 10% from the setpoint, the Cycle OK signal will not be activated, telling you that charging was not successful.
Supply voltage: 21-27V DC
Maximum current: 0.7A
Setpoint signal: 4-20mA
Electrical connection: M12 connector, 5-pin
Output voltage: 0-20kV
Output current: 0.4mA @ 100% duty cycle
Operating environment: Industrial, internal
Ambient temperature: 0-55 deg. C
Protection rating: IP54
Remote on/off: 10-30V DC
Dimensions: 200 x 45 x 36mm
Weight: 340g
Warranty: 4-years
Options: IQ version available (CME IQ)
Website managed by Iron Valley Digital
